DQ600
Description
Specifications/
Model | Unit | DQ600 |
Job Content | ||
Table Size | MM | 1000*300 |
Rotary Barrel Machining Range | MM | 600*300 |
ZAds Travel (Up-Down) | MM | 250 |
Maxsimum Worktable Load | KG | 300 |
spindle specfications | ||
Spindle Structure | 1 | Elecric spindle |
Spindle Power /Speed | KW | 5.5/18000 |
5pindle Tool Change Method
(Standard/Optional) | 1 | Manual/Automatic |
Spindle Mode:(Standard/Optional) | I50 | ER32/BT30 |
Feed Specifications | ||
G00 Rapid Feed (X/Z Axis) | M/MIN | 24/24 |
G01 Cutting Feed | M/MIN | 0-10000 |
Servo Motor specifications(X/Z Auis) | KW | 0.85/0.85 |
Servo Motor speed | RPM | 2500 |
XAxis Motor Connection Method | 1 | Direct Coupling |
ZAxis Motor Connection Method | 1 | Direct Coupling |
X-Axis Ball Screw Specifications | MM | 32 |
Z-Axis Ball Screw Specifications | MM | 32 |
X-Axis Linear Guide Speciications | MM | 30Raller |
Z-Axis Linear Guide Specifications | MM | 30Roller |
A-xis Paositioning Accuracy | MM | ±0.005 |
Repeatability | MM | ��0.003 |
Minimum Increment | MM | 0.001 |
Tool Magazine system(Optional) | ||
Tool Magazine Structure | 1 | Arm type |
Tool Magazine Capacity | PCS | 16/24 |
Tool Change Time | 5 | 2.2 |
Maximum Tool Weight | KG | 4 |
Maximum Tool Length | MM | 100 |
Pneumatic and Hydraulc system | ||
Air Pressure | Mpa | 0.65 |
Lubricating oil Capacity | L | 2 |
Power Supply Capacity | KW | 11 |
Coolant Tank Capacity | L | 150 |
Overall Dimensions | ||
Machine weight(Approx) | T | 2.8 |
Machine Length | MM | 1500 |
Machine widith | MM | 1000 |
Machine Height(Maximum) | MM | 2000 |
Chip Removal Method | Rear
discharge | |
