VT640
Description
Speclfcatins/Modet | Unit VT640 | |
Job Content | ||
Table Size | MM | 700*400 |
Table Travel(X/Y/Z) | MM | 600*400*350 |
Spindle Nose to Table Distance | MM | 150-550 |
Heightened or Extended Travel | H250-650 | |
Spindle Center to Column Guide
Distance | MM | 466 |
TableLoad Capacity | KG | 350 |
Spindle/Tool
Magazlne | ||
Spindle Specifications | 50 | BT30 |
Spindle Drive Structure/Standard) | / | Direct Drive |
Spindle Spred | RPM | 2000 |
Spindle Power | / | 3.755 |
Tool Magazine Structure | Clamp ArmType | |
Servo Tool Magazine Capacity | 21 | |
Tool Change Time | 5 | 1.8 |
Maxirum Taol Weight | KG | 6 |
Feed specficatlons | ||
GO1 Rapid Feed | M/MIN | 4B/48/48 |
G01 Cuting Feed | MM/MIN | 1-20000 |
Servo Motor specifications | N.m | 12/12/22B |
Servo Motor Speed | RPM | 3000 |
Motor Connectian Type | 1 | Direct Coupling |
Ball screw SpecificationsX/Y/Z | MM | 3216 |
X-Axis Linear Guide Specifications | MM | 30Roller |
Y-Axks Linear Guide specifications | MM | |
Z-Axis Unear Gulde specfications | MM | 35Roller |
Axis Positioning Accuracy | MM | ��0.005/300 |
Repeatabity | MM | ��0.003/300 |
Minimum Input increment | MM | 0.001 |
Pneumatic and Hydraulic System | ||
AIr Pressure | Mpa | 0.65 |
Lubricating oilCapacity | L | 4 |
Power Supply Capacity | KW | 18 |
Coolant Tank Capacity | L | 220 |
Overall Dimenslons | ||
Machine weight/ApprOx) | T | 3.6 |
Machine Length(Front to Back) | MM | 2150 |
Machine width(Left to Right) | MM | 2000 |
Machine Height(Maximum) | MM | 2700 |
Machine Height(Minimum) | MM | 2300 |
Bottom Chip Evacuation(Standard) | 1 | Frontflush&
rear discharge |
