VW50A
Description
Spellcalons/Model | Unit | VW50A |
Spindle Positioning Structure | Same-5ide | |
Job Comtent | ||
HorizontalX(left/right),Y(up/down),
Z(front/back) | CM | 80、55、550 |
Verticalx(left/right),Y(up/down),
Z(front/back) | CM | 80、55、550 |
Worktable Area(customizable) | MM | 500*500 |
Maximum Load Capacity | KG | 600 |
T-slot(slot width x number of slots) | MM | 18*3 |
Standard warkable Division Angle | ℃ | Arbitrary Division |
Custom Workable Division Angle | ℃ | 1、5、90 |
Distance from Horlzontal Spindle
Center to Worktable Surface | -200+500 | |
Distance from Horizontal 5pindle
Nose to Worktable Side | MM | +100-450 |
Distance from Vertical Spindle Nose
to Worktable Surface | MM | +200+750 |
Maximum Workpiece Height/Diameter | MM | 500/900 |
5pindle Detalls | ||
Tool Holder Type | BT40 | |
Max.Spindle Speed(BeltDrive,
Vertical&Horizontalj (Standard) | RPM | 8000 |
VerticaL&Horizontal Direct Drive
Spindle Speed(Optional) | RPM | 12000 |
Tool Magazine Details | / | |
Horizontaland Vertical Structure | 1 | Robotic Arm |
Maximum Taol Diameter | MM | 110(120) |
Maximum Tool Length | MM | 350 |
Maximum Tool Weight | KG | 8 |
Number of Tools
for Horizontal and Vertical | T | 24/24 |
Feed specifications | ||
G00 Rapid FeedX/Y/Z | M/MIN | 32/32/32 |
G01 Cutting Feed | MM/MIN | 1-10000 |
Spindle Motor for Horizantal/Vertical | KW | 11/11 |
X、Y、Z、B | N.m | 22/22/22/12 |
X-axis Guide Rals,Lead Screws | MM | 45+40 |
Y-axis Guide Rails,Lead Screws | MM | 45+40 |
Z-axis Guide Ralls,Lead Screws | MM | 45+40 |
Pneumatic and Hydraulie System | ||
Air Pressure | Mpa | 0.65 |
Lubricating OW Capacty | ||
Power 5upply Capacity | kw | 40 |
Cutting System Capaity | L | 450 |
Overall Dimensions | ||
Machine weight | T | 8.0 |
Machine Length(Front to Back) | MM | 3600 |
Machine width(Left to Right) | MM | 2800 |
Machine Heigqht(Maximum) | MM | 3300 |
Chip Discharge Method{Optional) | Single
Hinge Belt | |
Chip Discharge Method(Optianal) | / | Twinscrew |
Controle system | CNC | Multi-channel |
