MF2016
Description
Specificatons/Model | Unit | MF2016 |
Worktable Width | CM | 20 |
Worktabe Length | MM | 1600 |
Bridge Gantry Width | MM | 2250 |
X Axis Tave! | CM | 20 |
Y Axis Travel | MM | 1600 |
Distance from Spindle Nose to Worktable Surface | MM | 400-1200 |
Z Axis Trarvel (Optional) | MM | 1000 |
Distance from Spindle Nose to Worktable Surface | MM | 40-140 |
Bridge Ganty Width | MM | 2250 |
Maximum Worktable Load (Evenly Distributed) | T | 15 |
T-slot Specifications | MM | 6-28*250 |
Spindle Specificatons | ||
Spindie Box Mounting Structure | / | Side Hanging Type |
Square Ram Area | MM | 360*360 |
Electric Spindle Specilications (Customizable) | HSK | HSK A100 |
Electrnic Splndle speed | RPM | 15000 |
Electrie Spindle Power | KW | 45/54 |
Mechanical Spindle Specifications(Optional) | 50 | |
Mechanical Direct Drive Spindle Speed | RPM | 6000 |
Mechanical Spindle Power | KW | 22/26 |
Tool Magazine System (Orderlng Instruclions) | ||
Tool Magazine Structure | Servo Swing Arm Type | |
Tool Magazlne Capacity | PCS | 16/24/30 |
Tool Change Time(T-T) | 5 | 4.75 |
Maximum Tool Weight | KG | 15 |
Maximum Tool Length | MM | 350 |
Feed specifications | ||
G00 Rapid Feed (X/Y/Z Axis) | M | 16/24/24 |
G01 Cutting Feed | M | 1-10000 |
Servo Motor Specificatians | N.m | 30/30/308 |
X-Axis Dual Drlve Transmssion Mode | Ball Screw/Diret Coupling | |
X-Axis Precision Control Model (Optional) | Full Closed-Lo0p Grating Ruler | |
Y-Axis Single Drive Transmssion Mode | / | Ball Screw+Diret coupling |
Y-Axis Precision Control Model Optional) | / | Full Closed-Loop Grating Ruler |
Z-Axis Drive Transmissin Mode | / | Ball Screw+Diret Coupling |
Z-Axis Precisian Control Model Optional) | Full Cosed-Loop Grating Ruler | |
3-Axis Roler Ball Screll/Rack&Pinion | MM | 63/50/50 |
X-Axis Linear Guide Speclfications | MM | 45 Roller*4 |
Y-Axis Linear Guide Specifications | MM | 45 Roller*4 |
Z-Axis Linear Guide Speofications | MM | 45 Roller*4 |
Axis Positioning Accurary | MM | ±0.01/1000 |
Repeatability | MM | ±0.005/1000 |
Minimum Input Increment | MM | 0.001 |
Pneumatic and Hydraulic System | ||
Air Pressure | Mpa | 0.65 |
Bed Block Height | MM | 70 |
Lubricating oil Capacity | L | 4 |
Power Supply Capacity | KW | 50 |
Coolant Tank Capacity | 400 | |
Overall Dimensions | ||
Machine Weight | 22 27 | |
Machine Length | CM | 480 580 |
Machine width | MM | 3600 |
Machine Height(Maximum) | MM | 4600 |
Chip Removal Method on Both sides | / | Twin Screw |
Rear Chip Removal Method | / | Twin Hinge Plate |
