FA30
Description
Specifications/Model Unit | FA30 | |
Job Content | ||
Table Diameter | MM | Φ300 |
Maximum Horizontal Load Capacity | KG | 200 |
Maximum Vertical Load capacity | KG | 100 |
T-Slot (Number*Width) | （）*PCS X | 8*12 H8 |
B-Axis Swivel Angle | MM | -35°to +110° |
Maximum XYZ-axis Travel | MM | 300*200*350 |
5pindle Nose to Table Distance | MM | 100-450 |
Spindle Structure(Direct Drive) | ||
Spindle Mechanical Structure(Model A) | BT | BT30 |
Structural Speed Rating | RPM | Direct Drive 21000 |
Motorized Spindle Structure(Model B) | HSK | E50 |
Rated speed | RPM | 5000 |
Maximum Speed | RPM | 18000 |
Motorized Spindle Output Torque (51/56) | N.m | 21/25 |
Tool Magazine | ||
Tool Magazine Type | Disc Type | |
Tool Magazine Capacity | T | 16 |
Maximum Tool Length | MM | 200 |
Max.Tool Diameter(Fully Loaded) | MM | 60 |
Max.Tool Diameter (Adjacent Empty) | MM | 80 |
Tool Change Time | S | 1.8 |
Axis | ||
X-axis rapid traverse of the three axe5 | M/MIN | 36/36/36 |
Maximum Rotary Table Speed(B-Axis) | RPM | 80 |
Maximum Rotary Table Speed(C-Axis) | RPM | 80 |
Feed Motor Power(X/Y/Z) | NM | 12/12/22 |
Accuracy Specifications | ||
Applicable Standard | GB/T20957.4(ISO10791) | |
X-Axis Positioning Accuracy | MM | 0.08 |
Y-Axis Positioning Accuracy | MM | 0.08 |
Z-Axis Positioning Accuracy | MM | 0.08 |
B-Axis Positioning Accuracy | MM | ±5“ |
C-Axis Positioning Accuracy | MM | ±5“ |
X-Axis Repeatabllty | MM | 0.04 |
Y-Axis Repeatability | MM | 0.04 |
Z-Axis Repeatability | MM | 0.04 |
B-Axis Repeatability | MM | ±3“ |
C-Axis Repeatability | MM | ±3“ |
Air Pressure | Mpa | 0.65 |
Bed Mounting Block Height | MM | 50 |
Lubricating Oil Capacity | L | 4 |
Power Supply Capacity | KW | 35 |
Coolant Tank Capacity | L | 250 |
Machine Weight | KG | 3500 |
Overall Dimensions | ||
Machine Length | MM | 1400 |
Machine width | MM | 2500 |
Machine Height(Maximum) | MM | 2500 |
Chip Removal Method
(Standard) | Rear Discharge Hinge Belt Conveyor | |
