MG
Description
Specications/Model | Unit | MG |
Gantry structure | Moving Column | |
Model Specification Example | MG40100215 | |
Gantry sructure | Moving Calumn | |
Job Content | ||
Worktable width X | MM | 300-7000 |
Worktable Length Y | MM | 8000-10000 |
Gantry width | MM | 400-8000 |
X-Axis Travel (Front/Back) | MM | 80-10000 |
Y-Axis Travel (Left/Right)(Standard/Optional) | MM | 4200-9200 |
Z-Axis Travel(Up/Down) | MM | 1500-2500 |
W Axis Moving Beam Travel (Up-Down) | MM | / |
Distance from Spindle Nose to warktable Surface | MM | 500-200/3000 |
Spindle Specifications | ||
Spindle Drive Structure | / | ֱMechanical Direct Drive Spindle |
Spindle Drive Mode | 1 | Direct Drive Spindle |
Spindle Speed | RPM | 2500，4000，6000 |
High-Speed Electric Spindle (Optionai) | RPM | 4000，6000，8000 |
Spindle Bore Taper | ISO | BT50/HSK A100 |
Tool Magazine System (Optiona) | ||
Tool Magazine Structure | / | Arm Type |
Tool Magazlne Capacity | PCS | 24,36,48-200 |
Tool Change Time | S | 4.75 |
Maximum Tool Diameter(Ful/Empty Pocket) | MM | 110/220 |
Maximum Tool Weight | KG | 15 |
Maximum Tool Length | MM | 350 |
Feed Specfications | ||
G00 Rapid Feed | M/M | 6/8/15/5 |
G01 Cutting Feed | MM/MIN | 1-3000 |
Spindle Motor Power | KW | 37KW-63KW |
X-Axis Motor Specifications | N.m | 40*4 |
X Axis Motor Speed | RPM | 3000 |
X Axis Motor Connection Method | / | Reducer+Direct Coupling |
Precision Control Mode (Optional) | / | Full Closed-Loop Grating Ruler |
X Axis Drive Mode | / | M5 Precision Rack M5 |
X Axis Linear Guide Specifications | MM | 65 Roller4 |
X Axis Positioning Accuracy | MM | ±0.01/500 |
Y Axis Motor Specificatlons | N.m | 40 |
Y Axis Motor Speed | RPM | 3000 |
Y Axis Motor Connection Method | / | Reducer+Direct Coupling |
Precislon Control Mode | 1 | Full Closed-Loop Grating Ruler |
Y Axis Ball Screw Specifications | MM | M5 8020/RackM5 |
Y Axis Linear Guide Specifications | MM | 55 Roller3 |
Y Axis Positioning Accuracy | MM | ±0.01/300 |
Z Axis Motor Specifications | N.m | 40 |
Z Axis Motor speed | RPM | 3000 |
ZZ Axis Motor Connectian Method | 1 | Reducer+Direct Coupling |
Precision ControL Mode | 1 | Full Closed-Loop Grating Ruler |
Z Axls Ball Screw Specifications | MM | 63 |
Z Axis Square Ram Specifications | MM | 550*550 |
Z Axis Positioning Accuracy | MM | ±0.01/500 |
Minimum Input Increment | MM | 0.001 |
Pneumatic and Hydraulic System | ||
Air Pressure | Mpa | 0.65 |
Bed Block Height | MM | 80 |
Lubricating Oil Capacity | L | 4*4 |
Power Supply Capacity | KW | 80-160 |
Coolant Tank Capacity | L | 2000 |
Overall Dimensions | ||
Machine Weight | T | 95-350 |
Machine Length | M | 13000-1120000 |
Machine Width | M | 800-12000 |
Machine Height(Maximum) | M | 8.5-12.5 |
Chip Discharge Method(Optional) | 1 | Twin Screw+Twin Hinge Plate |
