MH
Description
Specificatfions/Model | Unit | MH |
Gantry Structure | / | Moving Column |
Mode Specification Example | / | MH1280ZB |
Gantry Structure | / | Moving column |
Job Content | / | |
Worktable Width X | MM | 1200 |
Worktable Length Y | M | 6 |
Ganty Width | MM | 1400 |
X-axis Travel (Front/Back) | M | 6 |
Y-axis Travel (Left/Right)(standard/Optional) | A | 1400 |
Z-axis Travel (Up/Down) | MM | 800 |
W-Axis Moving Beam Travel(Up-Down) | MM | |
Distance from spinde Nose to worktable Surface | MM | 200-1000 |
Spindle Specifications | ||
Spindle Drive Structure | / | Mechanical Direct Drive Spindle |
Spindle Drive Mode | Direct Drive Spindle | |
Spindle Speed | RPM | 12000 |
High-Speed Electric Spindle (Optional) | RPM | |
Spindle Bore Taper | 1s0 | BT40 |
Tool Magazine System(Optional) | ||
Tool Magazine Structure | / | Arm Type |
Tool Magazine Capacity | 24 | |
Tool Change Time | S | 4.75 |
Maximum Tool Diameter (Full/Empty Pocket) | MM | 110/220 |
Maximum Tool Welght | KG | |
Maximum Tool Length | MM | 350 |
Feed Specifications | ||
G00 Rapid Feed(X/Y/Z) | M/M | 60/32/32 |
G01 Cutting Feed | M/MIN | 1-3000 |
Spindle Motor Power | KW | 11 |
X Axls Motor specfcations | N.m | 30*4 |
X Axis Motor 5peed | RPM | 3000 |
X Axis Motor Connection Method | / | Reducer+Direct Coupling |
Precision Control Mode (Optional) | / | Full Closed-Loop Grating Ruler |
X Axis Drive Mode | / | M4 Precision Rack M4 |
X Axis Linear Guide Specifications X Axis Positioning Accuracy Y Axis Motor Specifications | MM MM N.m | 45 Roller*4 ±0.015/300 30Nm |
Y Axis Motor Speed | RPM | 3000 |
Y Axis Motor Connection Method | / | Direct Coupling |
Predislon Control Mode | / | Full Closed-Loop Grating Ruler |
Y Axis Ball Screw Specifications | MM | 50 |
Y Axis Linear Guide Specificatians | MM | 45Roller |
Y Axis Positioning Accuracy | MM | ±0.01/300 |
Z Axis Motor Specifications | N.m | 40Nm |
Z Axis Motor Speed | RPM | 3000 |
Z Axis Motor Connection Method | / | Direct Coupling |
Precision Control Mode | / | Full Closed-Loop Grating Ruler |
Z Axis Ball Screw Specifications | MM | 40 |
ZAxis Square Ram Specifications | MM | 45 |
Z Axis Positioning Accuracy | MM | ±0.01/500 |
Minimum Input Increment | MM | 0.001 |
Pneumatic and Hydraulic System | ||
Air Pressure | Mpa | 0.65 |
Bed Block Height | MM | 80 |
Lubricating oi Capacity | 42 | |
Power Supply Capacity | Kw | 40、50 |
Coolant Tank Capacity | L | 2000 |
Overall Dimensions | ||
Machine Weight | T | 23 |
Machine Length | M | 20 |
Machine Width | M | 27 |
Machine Height/Maximum) | M | 2.5 |
Chip Discharge Method(optional) | / | Twin Screw+ Single Hinge Plate |
