WY16A/B
Description
Specifications/Model | Unit | WY16A/B |
Worktable Surface Dimensions | MM | 1700x800 |
X-axis Travel | MM | 1600 |
Y-axis Travel
(Spindle Box Up-Down
Movement)(Standard/Optional) | CM | 70/90 |
WY-A Z-axis Travel
(Centered Moving Column)WY-A | MM | 1000 |
Distance from
Spindle End Face to Side of Worktable | MM | Inlet 130/Outlet 870 |
WY-B Z-axis Travel
(Side-Mounted Fixed Column)WY-B | MM | 800 |
Distance from
Spindle End Face to Side of Worktable | MM | Inlet 130/Outlet 670 |
Distance from
Spindle Center to Worktable Surface | MM | 120-820/1120 |
Worktable Slot Width+T Slots | MM | 9-28 |
Worktable Load Capacity | KG | 2500 |
Spindle&Spindle Box Specifications | ||
Spindle Taper Hole | ISO | BT50-190 |
Spindle Speed | RPM | 3000 |
Worktable T-slot (Slot Width x Number of Slots) | / | 28*300 |
Axis Ball Screw Specifications | MM | 50/50/50 |
G00 Rapid Feed X/Y/Z | M/MIN | 24.24.24 |
G01 Cutting Feed | MM/MIN | 1-10000 |
X-axis Linear Guide
Specifications(Hard Rail Optional) | MM | Roller55 |
Z-axis Linear
Guide Specifications(Hard Rail Optional) | MM | Roller55 |
Y-axis Linear Guide
Specifications(Hard Rail Optional) | MM | Roller55 |
X、Y、Z-axis Motor Connection Method | / | Direct Coupling |
Main Motor
Specifications (Standard /Optional) | KW | 22/36+Reducer |
Axis Positioning Precision | MM | ±0.005/300 |
Axis Repetitive Positioning Precision | MM | ±0.005/300 |
Minimum Input Increment | MM | 0.001 |
Spindle Box
Balancing System(Vertical Mounting) | / | Gas Balance |
Air Pressure | Mpa | 0.65 |
Coolant Tank Capacity | L | 550 |
Lubricating oil Capacity | L | 4 |
Tool Magazine Structure | / | Disc Arm Type |
Number of Tool Magazine
Slots(Optional) | PCS | 24/32 |
Tool Magazine Storage
Structure(Optional) | / | Chain Plate Type Magazine |
Number of Tool Magazine Slots | PCS | 40/50/60/80 |
Tool Change Time | S | 4.75/5.2 |
Maximum Tool Weight | KG | 18 |
Machine Weight(Approx) | T | 13/15 |
Machine Width | MM | 4000 |
Machine Length | MM | 5500 |
Machine Height(Maximum) | MM | 4300 |
Machine Structure | / | Inverted
T-type |
Chip Discharge Method | / | Twin Screw+Hinge Plate |
Description | / | |
A-centered Spindle Column Forward &Backward Travel "B"-Side-Mounted Ram Forward &Backward
Travel |
